Classic Floor Refinishing

“No Sand” Classic Renewal

N-Hance of Columbus Classic Renewal wood floor refinishing service is a great way to maintain or restore your floor’s finish without all the hassle of floor sanding. Our Classic Renewal can renew the original beauty of your wood floors, without the typical dust, mess, or odor associated with traditional sanded refinishing. Instead of the hassle and health concerns associated with the traditional sanding process, we offer a fast, family-friendly, and affordable way to restore wood floors to like-new condition.

If your floors don’t have big scratches or pet damage and you want to keep the same color, our “no sand” Classic Renewal is for you. If your floors have become dull from cleaners and have micro-scratches from foot traffic, our “no sand” Classic Renewal is the perfect solution.

In the past, refinishing wood floors was disruptive and sometimes a dangerous process. Between wood dust and chemical fumes, refinishing was inconvenient at best and a heath hazard at worst.

Thanks to our revolutionary water-based products, non-sanding process, and Lightspeed® Nano technology, you can avoid these concerns with N-Hance of Columbus. We’ll not only restore your floors to their original beauty, but we’ll do so without any of the dust or lingering chemical odors of traditional refinishing methods. Even better, we’ll complete your project in just a fraction of the time and at a fraction of the cost of a typical sanding process!

BeforeAfter

Benefits of N-Hance Wood Floor Refinishing

Any homeowner who has had their floors sanded and refinished will know how inconvenient traditional refinishing methods can be.

First, there’s the sanding which takes time and removes material from your floor, reducing the usable life of the floor.

Second, there’s the matter of chemical fumes. Solvents that are used to strip away old layers of finish can release highly toxic fumes into the air inside your home. Then there’s the odor from the new layer of finish. Some homeowners fit it necessary to vacate to a hotel while they wait for finishes to cure and chemical odors to dissipate.

Finally, there’s the wait. Traditional wood floor refinishing can take anywhere for 3 to 5 days for a typical project. During that time, your home’s in disarray. What’s more, if family members or pets are at home during the day, the work itself can make life miserable due to noise and fumes. Even after the workers are finished, it can take up to a full week for the new finish on your floors to cure.

With N-Hance, we minimize these issues.Our wood floor refinishing process minimizes dust using state-of-the-art equipment using HEPA 3-stage filtering to virtually eliminate dust from sanding, which means less clean up when we’re gone. Our process also requires no solvents, and our finishes are water-based and have lower VOCs than typical refinishing products. This way, you don’t need to worry about toxic fumes or lingering odors in your home than harm you or your pets.

What’s more, we refinish floors with minimal downtime. Our Lightspeed® Nano curing system uses ultraviolet light to instantly cure your new finish, a process that would normally take days. In fact, a typical N-Hance refinishing project is completed in just 1-4 days! And because our Classic Renewal service requires zero sanding, we can even restore the finish on non-sandable floors, such as cork or bamboo or hand-scraped floors without damaging the texture of the floor.

To top it all off, our wood floor refinishing services are highly affordable. We’re often able to refinish wood floors at a fraction of the cost of traditional refinishing.

Call N-Hance today at (614) 632-6882 to learn more about our wood floor refinishing services and get a FREE estimate!